Basic Info.
Media
Industrial Usage, Water Industrial Usage, Househol
Driving Mode
Manual/Electric/Pneumatic/Hydraulic
Connection Form
Single Flange/Double Flange /U Type /Lt/ Wafer
Structure
Double-Eccentric Sealing
Work Pressure
Low Pressure (Pn<1.6mpa)
Working Temperature
Normal Temperature (-40°C<T<120°C)
Standard
API609 En593 BS5155 En1092 ISO5211
Application
Industrial Usage, Water Industrial Usage, Household Usage
Disc Material
Di/Nylon/1.4469/1.4529/Saf2205/2507/CF8/CF8m etc
Face to Face
En558;API609;DIN3202;ISO5752;BS5155;Awwa
Body Material
Cast Iron/Ductile Iron/Wcb/CF8m/CF8/Al-Bronze
Seat Material
NBR/EPDM/PTFE/Viton/Silicone etc
End Standard
Pn6/10/16/25/21/150lb/JIS5K/10K/As2129 Table D/E/F
Shaft Material
410/420/304/316/2205/2507/416/431
Pressure Test
Jb/T/API58/En1226/BS6755
Design Criteria
API609/BS5155/En593/Awwac504/DIN3354/ISO10631
Other Services
3.1 The Certificate/Mtc/SGS
Transport Package
Plywood Case or Carton
Product Description
Product Description
Butterfly valve simple structure, small size, light weight, only by a few parts. And only need to rotate 90° can quickly open and close, simple operation, while the valve has good fluid control characteristics. Butterfly valve disc is installed in the pipe diameter direction. In the butterfly valve body cylindrical channel, disc disc around the axis of rotation, rotation Angle between 0°~90°, rotation to 90°, the valve is fully open state. When the flanged butterfly valve is in the fully open position, the thickness of the butterfly plate is the only resistance when the medium flows through the valve body, so the pressure drop produced by the valve is very small, so it has good flow control characteristics. Butterfly valve has two sealing types: spring seal and metal seal. Elastic seal valve, sealing ring can be mounted on the valve body or attached to the disc periphery
Detailed Photos
Product Parameters
The main characteristics of flanged butterfly valve are:
1, small and light, easy disassembly and maintenance, and can be installed in any position.
2, simple structure, compact, small operating torque, 90° turn to open quickly.
3, the flow characteristics of straight line, good regulation performance.
4. The connection between butterfly plate and valve stem adopts no pin structure to overcome the possible internal leakage point.
5, butterfly plate outer circle using spherical shape, improve the sealing performance and prolong the service life of the valve, with pressure open and close more than 50,000 times still maintain zero leakage.
6, the sealing parts can be replaced, and the sealing is reliable to achieve two-way sealing.
7, butterfly plate can be spraying coating according to user requirements, such as nylon or ptfe.
8, the valve can be designed as flange connection and clamping connection.
9, the driving mode can choose manual, electric or pneumatic.
Flange butterfly valve is suitable for temperature ≤120ºC or ≤150ºC, nominal pressure ≤ 1.6mpa water supply and drainage, sewage, food, heating, gas, ship, hydropower, metallurgy, energy system and textile industries, especially for two-way sealing and valve corrosion occasions, as flow regulation and closure medium. | |
| Body | Cast Iron Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
| Disc | Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
| Shaft | Stainless Steel Monel K500 |
| Seat | BUNA NBR EPDM VITON PTFE HEPDM Neoprene Hypalon Natural rubber |
Packaging & Shipping
Installation Instructions
1. The valve must be kept in a dry and ventilated room, and the valve plate should be opened 4-5 degrees.
2. Long-term storage should be checked regularly. Machined surfaces should be cleaned of surface dirt once every 6 months.
3. When installing, carefully check whether the use of the valve is consistent with the performance specifications.
4. Before installation, installation and debugging personnel should carefully read the operation manual, electric device manual, circuit diagram, etc., and be familiar with the installation and debugging procedures.
5. Pay attention to the following items during installation:
A. Check whether there are sundries in the valve channel and sealing surface, and clean them in time. The valve should be installed in time after unpacking, and do not loosen the fastening bolts of the valve at will.
B. When butterfly valve is installed, the butterfly plate should be in the closed position.
6. The connecting bolts between the butterfly valve and the pipeline should not be tightened individually at one time, but should be tightened alternately in the corresponding direction of the circumference to prevent the flange breakage or leakage caused by uneven tightening.
7 butterfly valve is generally one-way use, installation should be noted, the direction of the arrow on the valve body represents the pressure direction of the medium when the valve is closed.
8. Butterfly valve can be installed in any Angle of the pipeline, but should not be inverted, usually vertical or horizontal installation.
9. If you need to adjust the flow during use, adjust the opening position of the driving device for control.
10. When the electric butterfly valve leaves the factory, the opening and closing stroke of the control mechanism has been adjusted well. In order to prevent the direction of the power supply from being wrong, the butterfly valve should be manually switched to the half-open position for the first time, and then switch to check whether the direction of the indicating disk is consistent with the direction of the valve.
11. Seal test must be carried out after valve repair.
Company Profile
The company covers an area of about 15,000 square meters, more than 200 employees, 15 technical personnel, the company mainly produces water series of valves, butterfly valves, gate valves and check valves, as well as other customers ordered
This year, we passed the DNV and ABS certificates
After Sales Service
1.We have enough stock and can deliver in short all year round, because we are actually a manufacturer.
2.We are amenable to advice in choosing type of valve or others for customers.
3.Normally, OEM and ODM can be accepted.
4.We also offer designed drawing and technical supports.
5.Fast and quick response if you need any assistance.
Address:
No. 29, No. 6 Road, Xiaozhan Industrial Park, Jinnan District, Tianjin, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
We are Tianjin OTS valve Manufacturing Co., Ltd was established in year 2001, , produce valves for more than 22 years, our business focus on R&D of valves for fluid control industry. Our production with test facilities has been certified to ISO9001 and CE by Lloyd′s Register. We impose the strictest quality control at every stage of manufacturing to assure product functionality and reliability! Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Butterfly valve simple structure, small size, light weight, only by a few parts. And only need to rotate 90° Can quickly open and close, simple operation, while the valve has good fluid control characteristics. Butterfly valve disc is installed in the pipe diameter direction. In the butterfly valve body cylindrical channel, disc disc around the axis of rotation, rotation Angle between 0° ~90° , rotation to 90° , the valve is fully open state. When the flanged butterfly valve is in the fully open position, the thickness of the butterfly plate is the only resistance when the medium flows through the valve body, so the pressure drop produced by the valve is very small, so it has good flow control characteristics. Butterfly valve has two sealing types: Spring seal and metal seal. Elastic seal valve, sealing ring can be mounted on the valve body or attached to the disc periphery
){kind=link}